- Welcome to Bitsum Community Forum.
Development (period)
Recent posts
#1
General / <a href=https://creditcardbank...
Last post by Сергей - Today at 05:52:11 PMКаталог финансовых продуктов: сделайте выбор с умом
Принимать финансовые решения может быть сложно.
Но с нашим каталогом финансовых продуктов это стало проще, чем когда-либо!
Мы собрали все лучшие финансовые продукты в одном месте, чтобы вы могли легко сравнить их и найти те, которые подходят именно вам. Наши экспертные обзоры и рейтинги помогут вам принять обоснованное решение, соответствующее вашим уникальным потребностям.
<a href=https://creditcardbank.ru/>займ деньги</a>
Независимо от того, ищете ли вы кредит наличными, дебетовую карту или инвестиционный счет, наш каталог финансовых продуктов поможет вам сделать правильный выбор. Посетите нас сегодня и начните свое финансовое путешествие с уверенностью.
#2
General / milf story
Last post by SigHer - Today at 04:30:25 PM #3
Process Lasso / Re: Cpu % info
Last post by Jeremy Collake - Today at 03:24:39 PMQuote from: Peppo on Yesterday at 04:13:59 PMThank you, the explanation helped me better understand some things about the program.
So there isn't a column where the CPU usage for the single application is displayed like in the status bar (which is global) to know the actual usage of the single application?
Correct, the per-process CPU Utility is not currently shown, only CPU Time. However, you can extrapolate from CPU Time your biggest consumers.
#4
General / Re: Can't reconfigure the way ...
Last post by larkimpressive - Yesterday at 11:47:04 PMI did not encounter this message during use. Is your browser blocking the execution of InstallHelper.exe?
#5
General / Телеграм канал с выгодными зай...
Last post by Bertakisex - Yesterday at 09:00:27 PMНедавно я переехал в новую квартиру и сразу понял, что старая мебель сюда не подходит. На покупку новой мебели понадобилось 15 тысяч рублей. В интернете я нашёл канал https://t.me/s/novue_zaimu, который предложил множество вариантов новых займов без отказа. Оформив заявку по советам с канала, я быстро получил нужную сумму на карту. Теперь у меня современная и уютная мебель, а процесс получения займа прошёл быстро и без проблем.
#6
Process Lasso / Re: Cpu % info
Last post by Peppo - Yesterday at 04:13:59 PMThank you, the explanation helped me better understand some things about the program.
So there isn't a column where the CPU usage for the single application is displayed like in the status bar (which is global) to know the actual usage of the single application?
So there isn't a column where the CPU usage for the single application is displayed like in the status bar (which is global) to know the actual usage of the single application?
#7
Process Lasso / Re: My E-cores makes me crazy
Last post by Manuel - Yesterday at 03:18:24 PMQuote from: Jeremy Collake on Yesterday at 02:03:22 PMWow! The difference in performance is remarkable, and enough to pique my curiosity.
Can you advise steps to reproduce this with the SCIA Engineer software? I've got a trial of it and will begin experimentation.
Thank you for your response!
The version of SCIA Engineer is v24.0.
At the link below you can download the model I used as a test; it is already calculated, just run the reinforcement analysis as per the instructions below.
- Open the file in the software;
- look for "Concrete 2D reinforcement design" in the top bar and click on it (image below);
- on the sidebar that will appear press "Refresh" to par start the analysis (image below);
- the analysis will be completed when colored areas appear on the surface of the object.
Link file [P-E cores - Reduced - v2.esa]:
https://drive.google.com/file/d/1fPhtfgYoO_CmjMCsZhACDFobhzqjEfx6/view?usp=sharing
Write to me with any problems!
Thanks in advance
Manuel
STEP 1
STEP 2
#8
Process Lasso / Re: My E-cores makes me crazy
Last post by Jeremy Collake - Yesterday at 02:03:22 PMWow! The difference in performance is remarkable, and enough to pique my curiosity.
Can you advise steps to reproduce this with the SCIA Engineer software? I've got a trial of it and will begin experimentation.
Can you advise steps to reproduce this with the SCIA Engineer software? I've got a trial of it and will begin experimentation.
#9
Process Lasso / Re: Cpu % info
Last post by Jeremy Collake - Yesterday at 01:52:55 PMThe process list is showing CPU Time % while the graphs are showing CPU Utility %.
(Below text partially taken from FAQ)
There are two common types of CPU use measurements, CPU Time (%) and CPU Utility (%).
CPU Utility takes into account frequency scaling, and can exceed 100%.
In the Process Lasso status bar, both CPU Time and CPU Utility are shown.
Task Manager will show CPU Utility in its "Processes" view, while Process Lasso shows per-process measurements in CPU Time. Elsewhere, Process Lasso shows CPU Utility %, like Task Manager. If you switch to Task Manager's "Details" view, you'll see CPU Time measurements instead, which should match Process Lasso.
Although CPU Utility can exceed 100%, its display is capped at 100% in some areas, such as the graph. Task Manager also caps it. Other areas, such as the status bar and tooltips, will show the actual CPU Utility.
You can switch the Process Lasso graphs to CPU Time by unchecking menu item 'View / Show CPU Utility % instead of CPU Time %'.
For more information on CPU Utility vs CPU Time, read Task Manager's CPU numbers are all but meaningless.
As for ProBalance, it uses CPU Time, so I'm guessing you didn't hit threshold on it, or there were other reasons to exclude the process.
Does this answer your concern?
(Below text partially taken from FAQ)
There are two common types of CPU use measurements, CPU Time (%) and CPU Utility (%).
CPU Utility takes into account frequency scaling, and can exceed 100%.
In the Process Lasso status bar, both CPU Time and CPU Utility are shown.
Task Manager will show CPU Utility in its "Processes" view, while Process Lasso shows per-process measurements in CPU Time. Elsewhere, Process Lasso shows CPU Utility %, like Task Manager. If you switch to Task Manager's "Details" view, you'll see CPU Time measurements instead, which should match Process Lasso.
Although CPU Utility can exceed 100%, its display is capped at 100% in some areas, such as the graph. Task Manager also caps it. Other areas, such as the status bar and tooltips, will show the actual CPU Utility.
You can switch the Process Lasso graphs to CPU Time by unchecking menu item 'View / Show CPU Utility % instead of CPU Time %'.
For more information on CPU Utility vs CPU Time, read Task Manager's CPU numbers are all but meaningless.
As for ProBalance, it uses CPU Time, so I'm guessing you didn't hit threshold on it, or there were other reasons to exclude the process.
Does this answer your concern?
#10
Process Lasso / Cpu % info
Last post by Peppo - Yesterday at 09:44:16 AMA greeting
I was trying the process lasso program, it's version 14.1.0.20
I noticed that even if all the cores of the Intel 12600k CPU work at 100% even for prolonged periods, for example for video re-compression, even if it appears from the task manager, in the process lasso program it results at a low %, I also noticed that pro balance, perhaps for this very reason, does not come into operation.
I wonder if this is correct or should I set some options, thanks
I was trying the process lasso program, it's version 14.1.0.20
I noticed that even if all the cores of the Intel 12600k CPU work at 100% even for prolonged periods, for example for video re-compression, even if it appears from the task manager, in the process lasso program it results at a low %, I also noticed that pro balance, perhaps for this very reason, does not come into operation.
I wonder if this is correct or should I set some options, thanks