Not a big deal but when process lasso is used on a system with an Opteron 180 CPU, the CPU utilization graph displays incorrect usage. Looks like if my CPU is at 10%, the graph makes it look like it is at 90%. However, when I minimize to the tray, the icon looks correct.
So with top graph of PL GUI enabled does the red line in graph match the bottom status bar >CPU utilization % ?
And did it showing all process has a normal CPU usage? :)
Yes to both of the above posts. When the GUI is minimized the icon looks exactly like the CPU usage that is actually occurring. But when I open the GUI, the scrolling graph looks correct, but the CPU (per core) utilization graph looks backwards from what is actually being graphed. So my CPU appears, for example, to be stressed at 80% in the per core utilization, but the scrolling graph (red line) is approximately at 20%. I loaded PL on a quad core machine and the CPU utilization and the scrolling (red line) matches as it should.
Also, I'm just using the "out of the box" settings after installation of PL.
Ah, ok your talking about the bar graph, one for each core .
That particular graph has had various issues but most were just graphical , but if it shown a bar % was ok .
Maybe its way Opteron works , different than other CPU , see what support says when he gets here .
The core utilization graph is probably showing a single core. On an 8 core system, if a single core is at 90%, then that represents about 10% total CPU utilization.
If you can take a screenshot / snip , then I'll have a better idea of what you mean. Don't worry with the system tray icon, I understand it is correct.
Image is attached showing the scrolling graph and CPU per core bars.
I think it can be caused by C&Q?
I see.
It could have something to do with the system/CPU configuration.
Let me do some analysis here and narrow down the possibilities.
Thanks!