Bitsum Community Forum

General Category => Process Lasso => Topic started by: Toncey on August 31, 2014, 07:26:36 PM

Title: Parking Cannot Be Disabled
Post by: Toncey on August 31, 2014, 07:26:36 PM
This first occurred after I reinstalled Windows 8.1 Update 1.

"Error changing Profile Power parameters. You may have insufficient rights! Are you running as a limited user?" I'm running as administrator obviously.
Title: Re: Parking Cannot Be Disabled
Post by: Jeremy Collake on August 31, 2014, 09:01:43 PM
Hmm. At what point did you see this? Have you got ProBalance set to disable core parking?

I'm not yet sure of the cause, but I can guarantee you that there is no general compatibility issue with Windows 8.1.

Is this an English installation of Windows?
Title: Re: Parking Cannot Be Disabled
Post by: BenYeeHua on September 01, 2014, 03:19:40 AM
I just tested and it is working fine with latest update installed for Windows 8.1 Update 1, even with UAC enabled.
Maybe there are some Anti virus blocking it?
Did you tried "Run as Admin"?
Title: Re: Parking Cannot Be Disabled
Post by: Choccy on September 26, 2014, 02:03:21 PM
I've been having the same problem, tried running as admin, UAC is off, anti virus disabled (tried with it uninstalled too).

Any help appreciated.
Title: Re: Parking Cannot Be Disabled
Post by: BenYeeHua on September 26, 2014, 02:18:51 PM
Hmm...

How about you try using the Powercfg to disable it?
You can find the information at the "Changing Parking Settings Using PowerCfg" :)

https://bitsum.com/parkcontrol/
Title: Re: Parking Cannot Be Disabled
Post by: Choccy on September 26, 2014, 03:03:39 PM
.. forgot to mention I tried that.  When I go into the power options and try changing the percentage of "Processor performance core parking min cores" nothing happens, it just stays at 0%.
Title: Re: Parking Cannot Be Disabled
Post by: BenYeeHua on September 27, 2014, 02:22:20 PM
Hmm, so what is the error that it is showing when you are using PowerCFG?
And did your used some other Power Plan "optimizer" or similar software that disable core parking?
Title: Re: Parking Cannot Be Disabled
Post by: Choccy on September 29, 2014, 05:13:10 AM
As far as I'm aware I've not tweaked anything beyond what Piriform CCleaner does. http://www.piriform.com/ccleaner (http://www.piriform.com/ccleaner)

The message I get from Process Lasso:
"ERROR Changing Power Profile parameters.  You may have insufficient rights! Are you running as a Limited User?"
Title: Re: Parking Cannot Be Disabled
Post by: BenYeeHua on September 29, 2014, 10:48:37 AM
So no error when you are running the PowerCFG?

If you can, you may use the Process Monitor to monitor the registry read/write, then do this again.
QuoteWhen I go into the power options and try changing the percentage of "Processor performance core parking min cores" nothing happens, it just stays at 0%.
It should show some clue about what happen.

But, be aware that it may contain sensitive information, if you want to export and upload to here, and it will be better if you know how to use Process Monitor, then check yourself, so you don't need to worry about sensitive information. :)

You should found some information about how to use it by using Google. ;)
Title: Re: Parking Cannot Be Disabled
Post by: Jeremy Collake on October 09, 2014, 12:08:47 AM
Is this computer used at work, part of a domain?