Process Lasso with No Mans Sky

Started by Spitwulf111, September 06, 2022, 04:25:57 AM

Previous topic - Next topic

Spitwulf111

Hello, for some reason I have to shut down the governor and then exit from PL for NMS multiplayer to work. Does anyone have any experience with this and how to make PL work with NMS? Thanks

Jeremy Collake

#1
Have you set any custom rules on NMS's process? If so, remove them.

We do have a report that a custom CPU affinity rule on NMS may cause it to fail to load.

You can reset that specific rule by right-clicking on the process and choosing 'CPU Affinity / Always / None'. Alternatively, you can reset all configuration via 'Options / Reset Configuration'.
Software Engineer. Bitsum LLC.

Spitwulf111

Jeremy

Thanks for the suggestions, but they didn't work. I first checked Affinity for the NMS exe, and it was already set to None. I then reset configuration under options. But NMS still wouldn't connect to multiplayer. Any other suggestions? Thanks!

Jeremy Collake

If you had other rules set prior to clearing the configuration, you may need to restart the system to fully clear any effects.

However, it may not matter. An overzealous anti-cheat system may be to blame.

I've logged this for further investigation (we'll see if we can repro) and will report back when there is news.
Software Engineer. Bitsum LLC.