Dlink

Started by heavyt, September 29, 2011, 02:14:34 AM

Previous topic - Next topic

heavyt

Hi all  :)
I have extracted a dlink image without any errors,

FW_SIZE='7238450'
HEADER_TYPE=''
HEADER_SIZE=''
HEADER_IMAGE_SIZE='256'
HEADER_IMAGE_OFFSET='0'
FOOTER_SIZE='160'
FOOTER_OFFSET='7238290'
FS_TYPE='squashfs'
FS_OFFSET='256'
ENDIANESS='-be'
MKFS="./src/squashfs-2.1-r2/mksquashfs"


DECIMAL      HEX          DESCRIPTION
-------------------------------------------------------------------------------------------------------
256          0x100        Squashfs filesystem, big endian, version 2.0, size: 6567884 bytes, 1167 inodes, blocksize: 65536 bytes, created: Mon May  9 06:49:15 2011

I get 3 folders, the folder with rootfs has all the files and folders, but when I look at all the files they are zero bites, and nothing written in them.
The image parts folder, has 3 files and the rootfs image file is 6.9mb, but the rootfs folder has about 1600 files and folders and only 315kb in total size, so i am wondering if it is getting extracted properly or am i missing a step?

thanks for any help guys!!!

does this mean the image is not supported even though I get a successful extraction?
dam all these math questions on the verification lol.


Jeremy Collake

Please post in the Firmware Mod Kit Google Code Project, as an Issue... you're more likely to get assistance. I can't say for certain here what the issue may be.
Software Engineer. Bitsum LLC.