DRX890 Firmware Mod

Started by coopdog, June 03, 2017, 12:00:49 PM

Previous topic - Next topic

coopdog

not sure if anyone could help but ive managed to dump the firmware from a drx890 via nand removal and im wanting to enable ssh debug etc. if anyone could help id be most grateful or even point me in the right direction.
Thx in Advance..

Jeremy Collake

Dumping is the easy part, putting it back together to where the router accepts it can be the harder part. The FMK may do this for you, but it hasn't been maintained in some time, so may not. If not, I can not assist, maybe someone can/will.

Thanks,
Software Engineer. Bitsum LLC.