Switch power profiles on the condition

[arom]

Hi (and sorry my poor English),

PL is very powerfull programm. I lack only one possibility: switching profiles on the CPU load condition.
What I have in mind is that additional option in Energy Saver, switching from the active profile to a energy saving profile IF the CPU load is less than xx%. And switching back from saving up IF the CPU load is higher than xx%.

Now (in my case) profiles switches from Balanced to ES when the computer is inactive for 60 seconds. In ES profile, I allow only one CPU core to run. But my computer is acting as a server (2008 r2), and sometimes the load is increased without any active user interaction: as a result, PL believes that the computer is always in Idle state (and always ES profile with only one core running is active).
It would be great if there was an additional condition: WHEN the CPU load is above xx% (say, 50%) - to switch profiles back from ES.

So, for example:
"Force this power profile..." - say, Ballanced;
check - "Enable Power Sever";
"When my PC is idle for:" - say, 60 sec;
"Switch to Power Profile" - say, Energy Saving;
check - "Allow switching only if CPU load less then" - percents;
check - "Force switching back if CPU load higher then" - percents.

Thanks again for a wonderful program, I am glad to try it.

[Jeremy Collake]

Thanks for the suggestion! We will eventually add power profile switching the Watchdog, which will allow you to set rules to switch power profiles on any number of events.