Author Topic: Setting CUP affinities and saving them.  (Read 4171 times)

Offline RichG

  • New
  • *
  • Posts: 1
Setting CUP affinities and saving them.
« on: April 28, 2014, 11:59:55 AM »
Can the CPU affinities be set and saved so each time I restart my computer they will come back and used as the affinities I assigned?  I'm using the free version and have imported and exported and I'm not sure how to make this work if I can in the free version.    Thanks for any help.  RichG  8)

Offline edkiefer

  • Volunteer User Moderator
  • Member#
  • *****
  • Posts: 1789
  • Gender: Male
Re: Setting CUP affinities and saving them.
« Reply #1 on: April 28, 2014, 12:31:26 PM »
It been long time since i checked free version , but how are you setting affinities, there 2 sections .
right click on the process if you choose current it will revert to stock net reboot .

If you set under always it should remember it next time .
Bitsum QA Engineer

Offline BenYeeHua

  • Member#
  • *****
  • Posts: 2232
  • Gender: Male
Re: Setting CUP affinities and saving them.
« Reply #2 on: April 28, 2014, 01:01:02 PM »
First, it is CPU not CUP. ::)
----
So here it is, when you right click on Process, it will showing CPU affinity.

Any change you set by using CPU affinity - Always - xxx will be save and reapply each times this process start running.

But any change you set by using CPU affinity - Current - xxx will just like the standard Windows Task Manager, it will not be saved and only apply to this process until it is end.
----
To make sure it is save and will apply next time, you can go to Options - Configure default CPU priorities, it(The process name) should be showing in there. :)

Offline edkiefer

  • Volunteer User Moderator
  • Member#
  • *****
  • Posts: 1789
  • Gender: Male
Re: Setting CUP affinities and saving them.
« Reply #3 on: April 28, 2014, 06:49:19 PM »
First, it is CPU not CUP. ::)
----
So here it is, when you right click on Process, it will showing CPU affinity.

Any change you set by using CPU affinity - Always - xxx will be save and reapply each times this process start running.

But any change you set by using CPU affinity - Current - xxx will just like the standard Windows Task Manager, it will not be saved and only apply to this process until it is end.
----
To make sure it is save and will apply next time, you can go to Options - Configure default CPU priorities, it(The process name) should be showing in there. :)

Hehe , what he says too !
 :P
Bitsum QA Engineer

Offline BenYeeHua

  • Member#
  • *****
  • Posts: 2232
  • Gender: Male
Re: Setting CUP affinities and saving them.
« Reply #4 on: April 29, 2014, 08:39:56 AM »
And, I said something wrong, it is not "Configure default CPU priorities", it should be "Configure default CPU Affinities". ;D
---
TR;DR:"Always" will always apply the setting to the process, but "Current" will only apply the setting before the process is end.