« previous next »
Pages: [1]

Author Topic: Two prgrams will not run [RESOLVED]  (Read 9128 times)

Offline parkd1

  • Member++
  • ****
  • Posts: 196
  • Gender: Male
Two prgrams will not run [RESOLVED]
« on: June 01, 2015, 05:41:12 PM »
Fire Fox will not run. It just opens then close.

https://nightly.mozilla.org/

Hwinfo diagnostic software will not run. It just opens then close

http://www.hwinfo.com/

If I rename the program exe file, it runs just fine. If I do not run Process Lasso, I do not have to rename the exe file and it runs just fine. Both programs are 64bit. If their is anything else you need to track this down and fix just ask.
 
« Last Edit: June 15, 2015, 09:14:31 PM by Jeremy Collake »
Logged


Online edkiefer

  • Volunteer User Moderator
  • Member#
  • *****
  • Posts: 1787
  • Gender: Male
Re: Two prgrams will not run
« Reply #1 on: June 01, 2015, 06:20:45 PM »
Quote from: parkd1 on June 01, 2015, 05:41:12 PM
Fire Fox will not run. It just opens then close.

https://nightly.mozilla.org/

Hwinfo diagnostic software will not run. It just opens then close

http://www.hwinfo.com/

If I rename the program exe file, it runs just fine. If I do not run Process Lasso, I do not have to rename the exe file and it runs just fine. Both programs are 64bit. If their is anything else you need to track this down and fix just ask.
Hi Parked1

This sound like you have a rule enabled on these processes , does log (PL one) say anything when you try and run (w/o) renaming ?

Also open the PL.ini config file and see if those processes are listed anywhere in rules (you didn't happen to use "terminate always " did you ?
configure disallow processes option or in ini
DisallowedProcesses=
Logged
Bitsum QA Engineer

Offline parkd1

  • Member++
  • ****
  • Posts: 196
  • Gender: Male
Re: Two prgrams will not run
« Reply #2 on: June 01, 2015, 06:28:25 PM »
Not sure but is there a way to check to see if I used terminate always.
Logged

Offline parkd1

  • Member++
  • ****
  • Posts: 196
  • Gender: Male
Re: Two prgrams will not run
« Reply #3 on: June 01, 2015, 06:36:05 PM »
Ok find it and removed it now works great. Thanks. :D
Logged

Online edkiefer

  • Volunteer User Moderator
  • Member#
  • *****
  • Posts: 1787
  • Gender: Male
Re: Two prgrams will not run
« Reply #4 on: June 01, 2015, 06:47:47 PM »
Quote from: parkd1 on June 01, 2015, 06:28:25 PM
Not sure but is there a way to check to see if I used terminate always.
Yes, It will be moved to disallowed process list , just check option menu window .

Glad it works
Logged
Bitsum QA Engineer

Offline BenYeeHua

  • Member#
  • *****
  • Posts: 2236
  • Gender: Male
Re: Two prgrams will not run
« Reply #5 on: June 02, 2015, 05:13:32 AM »
And then someday PL will be killed by some AV, and labeled as malware. ;D
Logged

Offline parkd1

  • Member++
  • ****
  • Posts: 196
  • Gender: Male
Re: Two prgrams will not run
« Reply #6 on: June 02, 2015, 12:44:02 PM »
Quote from: BenYeeHua on June 02, 2015, 05:13:32 AM
And then someday PL will be killed by some AV, and labeled as malware. ;D

I got rid of it by opening the ini file. Your way is way better. That helps a lot. Thanks  again
Logged

Offline BenYeeHua

  • Member#
  • *****
  • Posts: 2236
  • Gender: Male
Re: Two prgrams will not run
« Reply #7 on: June 02, 2015, 03:07:48 PM »
lol, anyways, did you somehow added it into the disallow list, or the Process Lasso did it itself?
Just wonder did this is a bug or... mouse error. ;)
Logged

Online edkiefer

  • Volunteer User Moderator
  • Member#
  • *****
  • Posts: 1787
  • Gender: Male
Re: Two prgrams will not run
« Reply #8 on: June 02, 2015, 04:55:31 PM »
My guess he accidentally hit "terminate always" on a process instead of terminate, which would of added that process to disallow list .
I never had PL add a process by itself , its not HAL :)
Logged
Bitsum QA Engineer

Offline parkd1

  • Member++
  • ****
  • Posts: 196
  • Gender: Male
Re: Two prgrams will not run
« Reply #9 on: June 02, 2015, 06:16:36 PM »
Mouse error. Pretty sure I hit it.
« Last Edit: June 06, 2015, 08:32:15 PM by parkd1 »
Logged

Offline Jeremy Collake

  • Administrator
  • Member#
  • *****
  • Posts: 5380
  • Gender: Male
  • The Lasso
    • Bitsum
Re: Two prgrams will not run
« Reply #10 on: June 03, 2015, 11:08:29 AM »
What I've decided to do here is remove the 'do not ask again' option from the disallowed process confirmation prompt. It's surely seldom used, and so there's no reason people can't tolerate that extra confirmation. Had that confirmation not been previously checked to 'not show again', probably this issue would have been notated.

Also, I'll see what I can do better notify when disallowed processes are run. Maybe finally bring back system tray tooltips, as I know some users have requested for some time. The issue with them is that, in certain environments, they can quickly become flooding.
Logged
Software Engineer. Bitsum LLC.

Offline BenYeeHua

  • Member#
  • *****
  • Posts: 2236
  • Gender: Male
Re: Two prgrams will not run
« Reply #11 on: June 03, 2015, 11:50:46 AM »
Quote
Also, I'll see what I can do better notify when disallowed processes are run. Maybe finally bring back system tray tooltips, as I know some users have requested for some time. The issue with them is that, in certain environments, they can quickly become flooding.
Start with logging first? :)
Logged

Offline Jeremy Collake

  • Administrator
  • Member#
  • *****
  • Posts: 5380
  • Gender: Male
  • The Lasso
    • Bitsum
Re: Two prgrams will not run
« Reply #12 on: June 03, 2015, 11:59:51 AM »
They aren't logged? Unless that specific log type is disabled, they should be.
Logged
Software Engineer. Bitsum LLC.

Offline BenYeeHua

  • Member#
  • *****
  • Posts: 2236
  • Gender: Male
Re: Two prgrams will not run
« Reply #13 on: June 03, 2015, 12:16:44 PM »
So I guess maybe we should asking to check the log first...

And yup, just tried, it did logged. :)
Logged

Online edkiefer

  • Volunteer User Moderator
  • Member#
  • *****
  • Posts: 1787
  • Gender: Male
Re: Two prgrams will not run
« Reply #14 on: June 03, 2015, 01:02:16 PM »
Check my post, I asked about logs   :)

They work fine
talking disallowed processes GWX.exe should be one , j/k  ;D
Logged
Bitsum QA Engineer

Offline Jeremy Collake

  • Administrator
  • Member#
  • *****
  • Posts: 5380
  • Gender: Male
  • The Lasso
    • Bitsum
Re: Two prgrams will not run
« Reply #15 on: June 03, 2015, 01:05:05 PM »
Thanks Ed!
Logged
Software Engineer. Bitsum LLC.

Offline BenYeeHua

  • Member#
  • *****
  • Posts: 2236
  • Gender: Male
Re: Two prgrams will not run
« Reply #16 on: June 05, 2015, 05:34:51 AM »
Quote from: edkiefer on June 03, 2015, 01:02:16 PM
talking disallowed processes GWX.exe should be one , j/k  ;D
lol, you can just disable in the Task Scheduler, check for it by using Process Explorer. ;)
Logged

Online edkiefer

  • Volunteer User Moderator
  • Member#
  • *****
  • Posts: 1787
  • Gender: Male
Re: Two prgrams will not run
« Reply #17 on: June 05, 2015, 06:49:26 AM »
Quote from: BenYeeHua on June 05, 2015, 05:34:51 AM
lol, you can just disable in the Task Scheduler, check for it by using Process Explorer. ;)
Right , either uninstall the update or disable the schedules that run it , I was just joking .
Logged
Bitsum QA Engineer

Offline BenYeeHua

  • Member#
  • *****
  • Posts: 2236
  • Gender: Male
Re: Two prgrams will not run
« Reply #18 on: June 05, 2015, 11:23:16 AM »
Quote from: edkiefer on June 05, 2015, 06:49:26 AM
Right , either uninstall the update or disable the schedules that run it , I was just joking .
Ya, and it don't taking much memory usage too, just the icon is annoying, as it just keep showing up even you has hidden it... :P
Logged

Online edkiefer

  • Volunteer User Moderator
  • Member#
  • *****
  • Posts: 1787
  • Gender: Male
Re: Two prgrams will not run
« Reply #19 on: June 05, 2015, 11:35:25 AM »
yeh, looks like they do a refresh when you reboot so sets settings to default , icon showing .
no biggy, it doesn't really do anything ,, yet :)
Logged
Bitsum QA Engineer

Offline BenYeeHua

  • Member#
  • *****
  • Posts: 2236
  • Gender: Male
Re: Two prgrams will not run
« Reply #20 on: June 06, 2015, 10:10:07 AM »
Quote from: edkiefer on June 05, 2015, 11:35:25 AM
yeh, looks like they do a refresh when you reboot so sets settings to default , icon showing .
no biggy, it doesn't really do anything ,, yet :)
Yup, as it is not ready for download.
---
And nope, it did something.
It changed your Windows Update, and now you never know did there are any update easily. ;D
Logged

Offline chris635

  • Member++
  • ****
  • Posts: 270
  • Gender: Male
Re: Two prgrams will not run
« Reply #21 on: June 06, 2015, 10:31:05 AM »
Just disable it through task scheduler. When your ready, then re-nable it.


Edit: This is for the system tray icon.
Logged
Chris

Offline BenYeeHua

  • Member#
  • *****
  • Posts: 2236
  • Gender: Male
Re: Two prgrams will not run
« Reply #22 on: June 06, 2015, 04:01:42 PM »
Yup, but somehow most people like to uninstall the patch, rather than just disable it via the task scheduler.
I guess they might want to download ISO or something...
Logged
Pages: [1]
« previous next »