NOTICE: This forum is mostly an archive, though new posts are allowed. Registration may require manual admin activation. After registering visit https://bitsum.com/contact/ to request account activation.
Started by admiralspeedy, December 06, 2016, 12:41:58 PM
Quote from: Jeremy Collake on December 11, 2016, 02:30:41 PMAre you sure it is PL switching you and there is no other power management software causing some havoc? This has been known to happen, so I ask first to check for any OEM software that might be trying to control power plans.Also note that if you use IdleSaver or ParkControl's Dynamic Boost, all types of controller input may not be recognized. (just FWIW)Also note that if your config gets screwy you can try exporting what you have now, a reset of all your config options, then see if you can make it work with new ones. If not, re-import your old config, etc...I will re-read your report later and see if I can glean any clue as to what it could be, am finishing up CPUBalance v1.0, as well as correcting the last of the emergency server work that begun last week.