NOTICE: This forum is mostly an archive, though new posts are allowed. Registration may require manual admin activation. After registering visit https://bitsum.com/contact/ to request account activation.
Started by lmstearn, May 01, 2019, 10:41:55 AM
Quote from: lmstearn on May 01, 2019, 10:41:55 AMHi there.An issue with this legacy rig with a freeze in wake-up from hibernate on a custom low performance power plan. Upgraded from 1803 to 1809. Everything seems ticketyboo, except for the hibernate freeze. Chkdsk took a while to find some disk errors, with the closing dialog to the effect they may be fixed at the restart. Ran all the tasks as suggested in the above Microsoft Answers thread. It's worthy of note that some files are gone from explorer windows which may be there when viewed again in a new window. As if nothing happened. The HDD is most likely showing its age- so it's a prime suspect.Almost absolutely sure I had found a way in 1803 to for the system to automatically change the power plan from the current to Balanced, and then to change it back to the custom plan after bootup. This was because booting up with a default Balanced or HP plan was never any problem.As to the "almost absolutely sure" bit, don't know if it was down through the GPE, or through a script- or whether the symptoms were circumvented by some other action. Remember reading somewhere that the action of power plan change would necessarily apply to the regular system shutdown as well- if that was a thing.Any ideas & suggestions welcomed!
powercfg.exe -h off, powercfg.exe -h on
QuoteMeasured Boot library encountered a failure and entered insecure state. InitState: 1, StatusCode: 0xC0000001, Failure Address: 0x81218B, Reference Address: 0x902120, Reason: 1.
After you boot your computer using Windows 10 DVD or System Repair Disc, a black screen appears with gray text "Press any key to boot from CD or DVD". Press any key.Select the correct time and Keyboard type.Click Repair your computer in the lower left corner.Select Troubleshoot from Choose an option screen.Click Advanced options in Troubleshoot screen.Click on command Prompt.Type these following commands and hit enter after each line of command:Bootrec /fixmbrBootrec /fixbootBootrec /scanosBootrec /rebuildbcd