Thanks for the reply JC.
I may have found a clue, I'm using PC 1.3.1.8 as well, & I found that if I changed Park Controls' power profile, the system then starts responding with profile changes. i started by giving PC a lower power profile than PL.
However it will not drop to
Power Saver at all. I now have both set to
High Performance with a switch to power saver after 15 seconds of no-interaction. This worked before the update.
Now PL & PC have both started showing switches between Hi Perf & Ultimate perf subject to load increase.
I do have
don't sleep active on some things, some of those are lower perf & things like Handbrake are high. Running either or both doesn't effect auto-profile change.
It appears that it will stay on my setting of
Hi Perf with only a browser & AV +PL & PC running, ie nothing with any special settings, for as long as I leave it, (even tho the higher performance state were & are currently off as I'm not running a game (or Steam) or anything.)
Update -
just noticed that
Main>Performance Mode was ticked, unticking allows changes.....

Not sure why it was ticked tho

Guess you'll have to slap me upside the head.
